Automatic Redraw
|
Views are not redrawn when the
application window changes in size or position if this option is not ticked.
|
Restore Last Layout
|
Previously used graphics layout is
restored
|
Manage Colour Profiles
|
Color profiles for graphic
presentation are adapted to users needs.
|
Default Colour Profiles
|
One of the 4 profiles can be set
as default. Profiles are: Black Background, Gray Background, White Background
and User-defined.
|
View Colour Profiles
|
Selecting one of the default color
profiles for presentation
|
Perspective View
|
Toggle between perspective and
parallel projection. If perspective view is on, the distance takes effect.
|
View Directions
|
Selecting one of the default view
directions for presentation Default view directions are: Top, North, South,
East, West, Default 3D. Arbitrary directions can be selected in View Options or
with the compass at the lower right corner.
|
Distance
|
For perspective view. The
distance is measured in viewing direction as specified in View directions to
the center point of the model. One of 4 distances can be selected: 100 m, 500
m, 1000 m and 2000 m
|
Draw Background Image
|
The specified picture will be
displayed as background of the window.
|
Draw Axes
|
Road axes will be displayed in
addition to the structure
|
View Nodes
|
Switch on or off the presentation
of nodes (for all structural objects presentation parameters as set in "View
Options")
|
View Elements
|
Switch on or off the presentation
of structural elements
|
View CS
|
Switch on or off the presentation
of cross-section geometry. Cross-sections may be viewed as "Simplified
cross-section", "Filled cross-section" or "Cross-section mesh"
|
View Bodies
|
Switch on or off the presentation of FEM bodies.
Element bodies may be viewed as "Simplified Bodies", "Body Outline", "Inner
Outline", "Detailed Bodies".
|
View Tendons
|
Switch on or off the presentation
of prestressing tendons.
|
Active System
|
Depending on activation status and orientation in
space, elements may be filtered as follows:
- Draw All
- Draw Active System
- Draw Non-Active System
- Draw Deck Elements
- Draw Pier Elements
|
Standard Layout
|
Reload the standard layout (Default
3D view, Black background etc.)
|
Load Complete Layout
|
Reload a previously saved
presentation layout
|
Save Complete Layout
|
Save the current layout under a
certain name allowing for reloading it at a later time.
|
Draw traffic (options)
|
Options to add a train position,
lane scale or train scale for a certain lane + train combination
|
Simultaneous mode
|
View display in main window get
updated automatically by clicking on any View options.
|